CUB806K
802.11bgn ,RT5372L ,USB ,2T2R
►Chipset:RT5372L
►WiFi-Band:2.4GHz
►Interface:USB
►Data Rate:PHY rate up to 300Mbps
►Antenna:Connect to the ANT pin of Module
►Security:WEP, WPA, WPA2
►Dimension:33mm x 15mm x 4.2m
►Support:WinXP/WinVista/Win7/Linux
2T2R
Bointec CUB806K is a WLAN module supporting IEEE 802.11b/g/n standards with 7-pin or 4-pin connector supporting USB2.0 interface. This is a small form factor and low cost compact WLAN module designed for the wireless connectivity.
300Mbps PHY rate
This module operates in 2.4GHz ISM frequency band; it applies a highly integrated MAC/BBP and RF/PA/LNA single chip RT5372 with 300Mbps PHY rate supporting. It fully complies with IEEE802.11n and IEEE802.11b/g standards.
Specification |
|
Main Chipset |
Ralink RT5372L |
Operation Frequency |
ISM band, 2412~2483.5MHz(Depends on country region) |
Protocols |
802.11:CCK,QPSK,BPSK,802.11g/n:OFDM |
Antennas |
Two outputs to external antennas, 50 ohm impedance. |
Security |
WEP 64/128, WPS; WPA/WPA2(TKIP, AES);WAPI |
Typical Transmit Power |
802.11b(CCK) 11Mbps:18+/-1dBm |
802.11g(OFDM)54Mbps:15+/-dBm |
|
802.11n(HT20@MCS7), 14+/-dBm;(HT40@MCS15), 14+/-dBm |
|
Receive Sensitivity |
802.11b:-88+/-dBm;802.11g:-73+/-dBm |
802.11n(HT20),-71+/-dBm;802.11n(HT40),-68+/-dBm |
|
Operating Voltage |
5.0VDC+-5%;<300mA@802.11g;or 3.3VDC+-5% |
Bus Interface |
USB2.0 |
Interface |
7-pin or 4-pin, 2.0mm, or 4-pin 2.54 mm pitch pin header |
Physical Specification |
|
Dimensions |
33*15x4.2mm(without pin header) |
Weight |
2.5g(without pin header) |
Software and System driver supported |
||
Operation System |
CPU Supplier |
Driver |
Linux 2.4/2.6 |
ARM, MIPSII |
Available |
Windows XP/Vista/7 |
X86 Platform |
Available |
Windows CE5.0/6.0 |
ARM, MIPSII |
Available |
Mac OS X 10.4~10.7 |
N/A |
Available |
Certifications |
|
Europe |
CE |
Global |
|
USA |
|