Bointec,3G/4G radio,router,wifi networks

CUB806K

802.11bgn ,RT5372L ,USB ,2T2R

►Chipset:RT5372L
►WiFi-Band:2.4GHz
►Interface:USB
►Data Rate:PHY rate up to 300Mbps
►Antenna:Connect to the ANT pin of Module
►Security:WEP, WPA, WPA2
►Dimension:33mm x 15mm x 4.2m
►Support:WinXP/WinVista/Win7/Linux

PDF Download Question

Description
Specification
Driver Download
Certification

2T2R
Bointec CUB806K is a WLAN module supporting IEEE 802.11b/g/n standards with 7-pin or 4-pin connector supporting USB2.0 interface. This is a small form factor and low cost compact WLAN module designed for the wireless connectivity.

300Mbps PHY rate
This module operates in 2.4GHz ISM frequency band; it applies a highly integrated MAC/BBP and RF/PA/LNA single chip RT5372 with 300Mbps PHY rate supporting. It fully complies with IEEE802.11n and IEEE802.11b/g standards.

Specification
Main Chipset	Ralink RT5372L
Operation Frequency	ISM band, 2412~2483.5MHz(Depends on country region)
Protocols	802.11:CCK,QPSK,BPSK,802.11g/n:OFDM
Antennas	Two outputs to external antennas, 50 ohm impedance.
Security	WEP 64/128, WPS; WPA/WPA2(TKIP, AES);WAPI
Typical Transmit Power (Antenna feed point)	802.11b(CCK) 11Mbps:18+/-1dBm
	802.11g(OFDM)54Mbps:15+/-dBm
	802.11n(HT20@MCS7), 14+/-dBm;(HT40@MCS15), 14+/-dBm
Receive Sensitivity (Antenna feed point)	802.11b:-88+/-dBm;802.11g:-73+/-dBm
Receive Sensitivity (Antenna feed point)	802.11n(HT20),-71+/-dBm;802.11n(HT40),-68+/-dBm
Operating Voltage	5.0VDC+-5%;<300mA@802.11g;or 3.3VDC+-5%
Bus Interface	USB2.0
Interface	7-pin or 4-pin, 2.0mm, or 4-pin 2.54 mm pitch pin header
Physical Specification
Dimensions	33*15x4.2mm(without pin header)
Weight	2.5g(without pin header)

Software and System driver supported
Operation System	CPU Supplier	Driver
Linux 2.4/2.6	ARM, MIPSII	Available
Windows XP/Vista/7	X86 Platform	Available
Windows CE5.0/6.0	ARM, MIPSII	Available
Mac OS X 10.4~10.7	N/A	Available

Certifications
Europe	CE
Global
USA

CUB806K

802.11bgn ,RT5372L ,USB ,2T2R

RELATED PRODUCTS