Home  >  Products  >  WiFi
CUB805K
  • CUB805K

CUB805K

802.11bgn ,RT5370 ,USB ,1T1R

    ►Chipset:RT5370
    ►WiFi-Band:2.4GHz
    ►Interface:USB
    ►Data Rate:PHY rate of 150 Mbps 
    ►Antenna:U.FL connectors x 1
    ►Security:WEP, WPA, WPA2
    ►Dimension:28.0 mm x 14.2 mm x 2.2 mm (± 0.2mm)
    ►Support:Support:WinXP/WinVista/Linux

WLAN module
Bointec CUB805K is a WLAN module supporting IEEE 802.11 b/g/n standards with 6-pin connector supporting USB 2.0 /1.1 interface.This is a small form factor and low cost compact WLAN module designed for the wireless connectivity of products with embedded system.


Soldered on a main PCB
This module operates in 2.4GHz ISM frequency band, it applies a highly integrated MAC/BBP and RF single chip RT5370 with 150Mbps PHY rate supporting.This module can be built-in other embedded applications such as IP Camera, IP set top box, GPS, Internet radio apparatus,it can be directly soldered on a main PCB.

Specification

Standards

IEEE 802.11b/g/n (1T1R mode)

Bus Interface

USB 2.0/11

USB Interface

Max: 7 pins, 2.0 mm pitch pin header. Or Max: 7 pins semi-hole.

Operating Frequency

2.412GHz~2.835GHz, the CH14 can be made upon request.

Protocols

802.11b: CCK, QPSK, BPSK

802.11 g/n:OFDM

Antenna

External antenna Via I-PEX MHF receptacle or Built-in On Board

Security

WPA/WP2?WPAI, 64/128/152-bit WEP, WPS

Transmit Output Power
(Typical value to antenna)

11b:17±1.0dBm @ 11Mbps;
11g:14±1dBm @ 54 Mbps

802.11n: (HT20), 12 ± 1dBm,
802.11n: (HT40), 12 ± 1dBm

Receive Sensitivity
(Typical value without antenna)

11b: -84dBm @ 11Mbps ; 11g: -72dBm @ 54Mbps

802.11n: (HT20), -68dBm @ MSC7, (HT40), -67dBm @ MSC7

Operating Voltage

5.0V or 3.3VDV ± 5%

Operating Current (OFDM, 54Mbps)

5.0 power input, <150mA; 3.3V power input<250mA

Operating Temperature

-15ºC to +70ºC

Storage Temperature

-30ºC to +85ºC

Operating Humidity

20% to 80%

Storage Humidity

20% to 80%

Certifications

Europe

(Pending)CE

Global

RoHS

USA

(Pending)FCC

BACK