Home  >  Products  >  WiFi
DGF109R
  • DGF109R
  • DGF109R

DGF109R

802.11abgn/ac+BT4.2 ,RTL8822BE ,M.2(2230) ,2T2R

    Bointec DGF109R IEEE 802.11 a/b/g/n/ac PCIE WIFI with Bluetooth 4.2 combo M.2 module is a highly integrated single-chip MIMO (Multiple In, Multiple Out) wireless local area network (WLAN) solution to let users enjoy the digital content through the latest wireless technology without using the extra cables and cords. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in s single chip. It enables a high performance, cost effective, low power, compact solution that easily fits onto the PCI Express and USB M.2 module.

    Wi-Fi Feature:

    • Support 802.11ac  2x2,Wave-2 compliant with MU-MIMO
    • Complete 802.11n MIMO solution for 2.4GHz and 5Ghz band
    • Maximum PHY data rate up to 173.3 Mbps using 20MHz bandwidth, 400Mbps using 40MHz bandwidth, and 866.7Mbps using 80MHz bandwidth.
    • Multiple BSSID feature allows the RTL8822BE-CG to assume multiple MAC identities when used as a wireless bridge
    • Wi-Fi Direct supports wireless peer to peer applications.
    • Supports Wake-On-WLAN via Magic Packet and Wake-up frame
    • Transmit Beam forming
    • Support Network List Offload
    • CCA on secondary through RTS/CTS handshake.
    • Maximum data rate 54Mbps in 802.11g, 300Mbps in 802.11n and 866.7bps in 802.11ac.

     

    BT Feature:

    • Compatible with Bluetooth v2.1 and v3.0+EDR
    • Support Bluetooth 4.1 system
    • Support Bluetooth 4.2 LE Secure Connection  by upper layer software upgrade
    • Integrated MCU to execute Bluetooth protocol stack
    • Supports all packet types in basic rate and enhanced data rate
    • Supports Pico nets in a scatter net
    • Supports Secure Simple Pairing
    • Supports Low Power Mode (Sniff/Sniff Sub-rating)
    • Enhanced BT/WIFI Coexistence Control to improve transmission quality in different profiles
    • Dual Mode support: Simultaneous LE and BR/EDR
    • Supports multiple Low Energy states
    • Fast AGC control to improve receiving dynamic range
    • Supports AFH to dynamically detect ch

Bointec DGF109R IEEE 802.11 a/b/g/n/ac PCIE WIFI with Bluetooth 4.2 combo M.2 module is a highly integrated single-chip MIMO (Multiple In, Multiple Out) wireless local area network (WLAN) solution to let users enjoy the digital content through the latest wireless technology without using the extra cables and cords. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in s single chip. It enables a high performance, cost effective, low power, compact solution that easily fits onto the PCI Express and USB M.2 module.

 

Bointec  DGF109R baseband implements Multi-user Multiple Input, Multiple Output (MU-MIMO) Orthogonal Frequency Division Multiplexing (OFDM) with two transmit and two receive paths (2T2R). Features include two spatial stream transmissions, short Guard Interval (GI) of 400ns, spatial spreading, and support for variant channel bandwidth.

 

Moreover, Bointec DGF109R provides one spatial stream space- time block code (STBC), Transmit Beam forming (TXBF) and Low Density Parity Check (LDPC) to extend the range of transmission. At the receiver, extended range and good minimum sensitivity is achieved by having receiver diversity up to 2 antennas. As the recipient, DGF109R also supports explicit sounding packet feedback that helps senders with beam forming capability.

Wi-Fi

Standard

IEEE802.11ac,IEEE802.11a , IEEE802.11b , IEEE 802.11g , IEEE 802.11n

Bus Interface

PCI Express

Data Rate

802.11b: 1, 2, 5.5, 11Mbps

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps

802.11n: up to 150Mbps-single

802.11n: up to 300Mbps-2x2 MIMO

802.11ac:up to 192.6Mbps (20MHz channel)

802.11ac:up to 400Mbps (40MHz channel)

802.11ac:up to 866.7Mbps (80MHz channel)

Media Access Control

 

Modulation Techniques

DSSS, OFDM, DBPSK, DQPSK, CCK, 16-QAM, 64-QAM for WLAN

Network Architecture

 

Operation Channel

2.4GHz:

USA, NORTH AMERICA, Canada and Taiwan – 1 ~ 11

China, Australia, Most European Countries – 1 ~ 13

Japan – 1 ~ 14(CH14 only for 802.11b)

802.11g:

USA, Canada and Taiwan – 1 ~ 11

China, Australia, Most European Countries – 1 ~ 13

5GHz:

USA, EUROPE – 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108,

112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

Frequency Range

2.4 GHz : 2.412 ~ 2.484 GHz

5 GHz: 4.915 ~5.925Ghz

Security

WAPI

WEP 64-bit and 128-bit encryption with H/W TKIP processing

WPA/WPA2 (Wi-Fi Protected Access)

AES-CCMP hardware implementation as part of 802.11i security standard

 

Bluetooth

Standard

Bluetooth 2.1+Enhanced Data Rate (EDR) + BT4.2

Bus Interface

USB2.0

Data Rate

Bluetooth 2.1+EDR data rates of 1,2, and 3Mbps

Modulation Scheme

GFSK (1Mbps), Π/4 DQPSK (2Mbps) and 8DPSK (3Mbps)

Frequency Range

2402~2480MHz

Transmit Output Power

Class 2 : 0~6 dBm

Receiver Sensitivity

GFSK: -88 dBm (Typical)

π/4-DQPSK: -89 dBm (Typical)

8-DPSK: -83 dBm (Typical)

Software

Bluetooth Suite

 

 

 

Electronics characteristics

Operating Voltage

3.3 V

OS Supported

Microsoft Windows

Antenna Type

I-PEX MHF4 Connector Receptacle (20449)

Main : Wi-Fi à TX/RX

Aux: Wi-Fi/Bluetooth à TX/RX

Environmental

Operating Temperature

  • Commercial: 0°C ~ +70°C

Storage Temperature

  • Commercial: -40°C ~ +85°C

Operating Humidity

  • Operating humidity: <85%
  • Storage humidity: <60%

 

Country

Certification

EU

CE

USA

FCC

Canada

IC

Japan

TELEC

Korea

KCC

Taiwan

NCC

BACK